Bluetooth Auto Scanner ELM327

Purchase Notes：

1.Our products support BimmerCode/BimmerLink,We only sell adapters to be compatible with these software, but some of the functions of the software or the software itself are not free, you need to pay additional fees to the software company

2.If your mobile phone is IOS, when you use BT4.0 Ver., please connect to BT directly in the software,Don’t connect to BT in phone settings

Feature:

• Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link.

• Support for BMW adjustment and programming.

• OBD2 Standard Protocols + More protocols.

• Fully automatic operation.

• Automatic sleep / start.

Function:

• Read/Clear DTC

• Engine RPM

• Module Reset

• Module Activation

• Remote Control

• Regeneration

• Automatic sleep/start

• Battery Tester

Supported for BMW models:

• For BMW 1 Series F20 F21

• For BMW 2 Series F22 F23 F87

• For BMW 2 Series Active Tourer F45

• For BMW 2 Series Gran Tourer F46

• For BMW 3 Series F30 F31 F34 F35 F80

• For BMW 4 Series F32 F33 F36 F82 F83

• For BMW 5 Series FO7 F10 F11 F18 F90

• For BMW 5 Series G30 G31

• For BMW 6 Series F06 F12 F13

• For BMW Serie 7 F01 F02 F03 F04

• For BMW 7 Series G11

• For BMW X1 F48

• For BMWX2 F39

• For BMW X3 F25

• For BMW X3 GO1

• For BMW X4 F26

• For BMW X5 F15 F85

• For BMW X6 F16 F86

• For BMW i3

• For BMW i8

• For Mini F54 F55 F56 F57 F60

Support Protocols:

OBDII Standard Protocols:

• SAE J1850 PWM

• SAE J1850 VPW

• ISO 9141-2

• ISO 14230-4(slow)

• ISO 14230-4(fast)

• ISO 15765-4(CAN)

More Protocols：

• SAE J1939(CAN)

• ISO 11898(raw CAN)

Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink for BMW professional diagnosis/activation/adjustment scanner:

Support Protocols

Multiple protocols：

–15 ELM format protocols;

— 23 STN format protocols;

— Up to 64 user-defined protocols.

OBDII 5 standard protocols：

— SAE J1850 VPW

— SAE J1850 PWM

— ISO 9141-2

— ISO 14230-4

— ISO 15765-4 CAN

Additionalprotocols：

— SAE J1939 CAN

— ISO 11898 (raw CAN)

These protocols cover almost 99% of the OBDII Cars on the market

Rich instruction set, compatible with more APP software：

— Fully compatible with ELM’s AT command set;

— Fully compatible with STN’s ST command set;

–39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.

— Compatible with ELM and STN power management solutions.

— Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

— Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.

— Device sleep power consumption is less than 2 mA.

— OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.

— UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

— 256-byte storage unit

— More than 100,000 erasable times

— Read and write operations on any unit in the storage area by using the VT command

— Mix ID Sending” mode of CAN protocol.

— Optional formatted send data according to protocol

— Multiple WM sequence settings

— Support AT command to manually set WM sequence

— Support for specifying a protocol or a full protocol-wide temporary WM sequence

— Support for a permanent link between a protocol and a private WM sequence

— Secure bootloader for easy firmware updates