OBD2 Automotive Scanner All Systems Diagnostic

TESTED ON 1,000+ REAL VEHICLES
REAL VEHICLE TESTING BEFORE MARKET LAUNCH
Diagnostic functions and vehicle compatibility have been repeatedly verified on 1,000+ real vehicles for more reliable performance.
BUY WITH CONFIDENCE

Stop Pay € 50-150 Every Time Your Dashboard Show a Reading Light

Dashboard Warning Lights:

Engine Light

ABS Light

Airbag Light

and more

Below:

With OBDMATE OM701:

✔Read Fault Codes

✔Clear Reading Lights

✔Check vehicle health

✔Find Problems Before Repair

Professional Diagnostics Made Simple

In buyer’s words:

Before

❌Guessing what’s wrong with your car

❌Paying high diagnosis Fees

❌Waiting days for a garage appointment

After

✅Diagnosis your car any time

✅Clearly understand the issues

✅Make smart repair choices…

PROFESSIONAL DIAGNOSTIC TOOL FOR TOYOTA

Specially developed for Toyota, Lexus and Scion vehicles, providing deeper vehicle coverage than a basic OBD2 scanner.

Why Choose The OM701 OBD2 Scanner for Toyota?

🔥 Full System Diagnostics for Toyota

Not just engine codes. The OM701 reads and clears faults across all Toyota systems — including:

Engine | Transmission | ABS | Airbag (SRS) | SAS | EPB | Body | Chassis | Powertrain and more

🔥 15+ Special Reset Services

Do the job yourself. Finish it yourself. Reset it yourself.

🔥 Toyota Coverage — 1996 to 2023

Compatible with most Toyota petrol vehicles from 1996 and diesel from 2004 up to 2023 models.

One tool. Covers 27+ years of Toyota.

🔥 Lifetime Free Updates

Your OM701 comes with lifetime free software updates.

No extra cost. Ever.

Save time. Money save. Diagnosis like a professional.

🚗Full OBD Level Diagnostics For All Vehicle Brands

What Could Cause the Check Engine Light to Turn On?

The check engine light can come on for many reasons. For example, oxygen sensor failure, loose fuel cap, catalytic converter failure, ignition coil issues, bad spark plug wires, vacuum leak, ect.

How to Turn Off the Engine Fault Light?

✔️Read/Erase Codes : Read the fault code within 3 seconds and clear the pending fault code, and turn off the engine light.

✔️Live Data Stream : Reads abundant live data stream and freeze frame data to monitor the operating status of the vehicle, including the status of the fuel system, engine coolant temperature, RPM and various sensor parameters.

✔️Smog Check :The purpose of the readiness monitors is to test the emission control systems of the vehicle itself. The monitors are also known as emission monitors. Determine if your vehicle is ready for a smog test.

✔️EVAP System Test : The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.

✔️Vehicle Information

🚗15 Free Advanced Reset Services:

ALL FUNCTIONS INCLUDED — NO SUBSCRIPTION FEES

Enjoy 15+ maintenance and reset functions with no additional activation fees or hidden charges.

Vehicle coverage and functions will continue to be updated and optimized.

Functions vary by vehicle model, year and configuration.

OM701 features most popular maintenance services including OIL RESET, ABS BLEEDING, THROTTLE BODY RELEARN, BMS RESET, SAS RESET, EPB RESET, FUEL TRIM, CLEAR PCM ADAPTIVE VALUE, INJECTOR CODING, DPF REGEN, etc. Function menu varies by vehicle’s specifics. IMPORTANT of TPMS: OM701 only supports entering the new tire sensor ids. It cannot reset or relearn the sensors directly. Please note down the sensor IDs from the tire sensor/wheel hub before changing tires if needed.

1.Oil Service Reset

Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil. Many quick-lube shops simply don’t know how to reset it. OBD2 scanner oil reset comes on strictly as a function of those miles can through maintenance-required light comes on to remind you to change your oil.

2.Battery Reset

Cars use an intelligent battery management system (BMS) to monitor the battery status.

After replacing the new battery, the vehicle needs to “register” the information of the new battery; otherwise, the vehicle may not be able to accurately calculate the remaining power, charging efficiency and energy recovery

3.ETC RESETThrottle Body Learning

After installing or cleaning the throttle position sensor (TPS), it may deviate from the original calibration.

The learning program enables the ECU to re-record the throttle opening range and the corresponding signals.

4.INJECTOR CODING

After replacing the fuel injectors, cleaning the fuel injectors or replacing the ECU, the fuel injector learning process needs to be carried out.

This ensures that the engine returns to its optimal performance.

5.SRS RESET

When the airbag or related sensors malfunction, the SRS warning light on the instrument panel will illuminate.

The Reset function can clear the error codes in the ECU and extinguish the warning light after the fault is resolved.The safety airbag system has a self-check mechanism involving capacitors and sensors.The Reset operation enables the system to return to its normal monitoring state, ensuring that it can trigger properly during a collision.

6.ABS RESET

After replacing the wheel speed sensor, ABS module or brake system components, it is necessary to relearn the sensor signals.

Ensure that the data from each wheel speed sensor is normal and the brake system detection is accurate.

Restore system monitoring and anti-lock functions.

After resetting, the ABS system can re-perform self-checks to ensure normal operation during emergency braking.

and more…..

DESIGNED FOR TOYOTA

🚗Toyota · 1996–2023

Tacoma · Corolla · Camry · Prius · RAV4 · 4Runner · Highlander · Sienna · and more

🚗Lexus · 1996–2023

RX · ES · NX · and more

🚗Scion · 2003–2016

FR-S · tC · iQ · xA · xB · xD

Functions vary by model. If you have any questions, please contact the store customer service for further information. Thank you.

🚗CHECK ENGINE SCANNER
Universal Compatibility. Professional Protocols.

Compatible with most vehicles:

🇺🇸 US: 1996 and newer

🇪🇺 EU: 2000 and newer

🇯🇵 Asia: 2000 and newer

🚗EASY TO USE

STEP 1 — CONNECT

Connect to the 16-Pin DLC

Plug the OM701 directly into the vehicle’s OBD port. The scanner is powered by the vehicle—no charging required.

STEP 2 — IDENTIFY

Auto VIN Recognition

Automatically identify compatible vehicle information, reducing manual selection and setup time.

STEP 3 — DIAGNOSE

Quick Scan & Diagnose

Quickly scan available vehicle systems, read fault codes and locate potential problems before repair.

Package List: